Aurea CD-175

A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

amplifier to accept either four channels of analogue audio or pick up four channels of networked audio
via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a CDi amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required.
Switch back to analogue to use as a powerful traditional quad channel amplifier
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode

Additional information

Number of channels	4
Output Power: (per channel)*	8 ohms 175W 4 ohms 350W 2.7 ohms 480W 50 ohms (100/70V line) 200W
Output Power: (bridged)	8 ohms 700W 4 ohms 660W
THD%: (@1dB below max output)	@ 1kHz < 0.01% 20Hz to 20kHz < 0.03%
Gain / Sensitivity:	Gain 26dB Sensitivity (for max power) 8.3dBu
Frequency Response:	20Hz to 20kHz (+ 0/- 0.3dB)
Power Consumption: (< 5W in standby)	Nominal @ 240v into 4 ohms 0.74A Nominal @ 120v into 4 ohms 1.53A
Dimensions: (2U) (mm)	Amplifier 44(h) x 482(w) x 428(d) Single Box (UK shipping) 100 x 580 x 590 Double Box (outside UK) 140 x 610 x 600
Weight:	Amplifier 5.1kg (w/o 100V/70 TX) Boxed (shipping weight) 5.9kg